Media

X
X
X
X
X
X


Beschrijving

Reznor's X duct furnaces are designed to provide 80% thermal efficiency for indoor application with gravity venting.  They are certified for use with natural or propane gas, as specified, in sizes from 75,000 through 400,000 BTUH input.

These models are used as heating components in heating, heating/cooling or makeup air systems and require a separate blower system for air delivery.  The furnace has a Thermocore aluminized steel heat exchanger with venturi-design tubes.  The die-formed burners are of aluminized steel and include flared ports with a stainless steel insert.  The model X furnace is approved for a temperature rise range of 50F to 90F and includes "finger-baffles" for proper air distribution at these lower air volumes.

Easy field conversion is possible for lower temperature rise, higher airflow applications. Check the Installation Manual with unit to determine if your application requires this. To convert the funace for higher airflow, remove air baffles per installation instruction manual.

Verwarmingscapaciteit ( MBH )

Luchtdebiet ( CFM )

Rendement bij vollast ( BW )

Standard

  • Orifices for natural gas
  • Aluminized steel heat exchanger
  • Aluminized steel burners with stainless steel insert
  • 120-volt supply voltage
  • 24 volt control voltage transformer
  • Fan Control
  • High limit safety cutout
  • Single-stage combination gas valve (see note 1)
  • Side access for burners and controls (left side facing air stream)
  • Horizontal or vertical flue discharge
  • Spark ignited pilot
  • Energy cutoff (ECO) device
  • Blocked vent shut-off system

Optional Features - Factory Installed

  • Unit equipped for propane gas
  • E-3 (409) stainless steel heat exchanger
  • 321 stainless steel heat exchanger
  • E-3 (409) stainless steel burners
  • E-3 (409) stainless steel drip pan
  • Spark-ignited intermittent safety pilot with electronic flame supervision
  • Spark-ignited intermittent safety pilot with electronic flame supervision and timed lockout
  • Two-stage controls
  • Electronic modulation - 50%-100% firing rate
  • Mechanical modulation
  • Burner air shutters (required on units equipped with propane gas)
  • Terminal blocks for connecting field wiring
  • 208/230/460-volt alternate supply voltage
  • Right side controls (facing airstream)

Optional Features - Field Installed

  • Single-stage thermostat
  • Two-stage thermostat
  • Electronic room override (makeup air applications only)
  • Thermostat guard with locking cover
  • Manual shut-off valve and union
  • Power venter with venter adapter
  • Condensate drain flange kit
  • Disconnect switch (UL Listed)

Brochures
2 Bestanden

Brochures


English
Duct Heater Marketing Catalog
Duct Heater Marketing Catalog
Bestand downloaden
858.0 kB
Product overview brochure Reznor , English
Product overview brochure of Reznor in English
for Europe and export markets with 50 Hz utility frequency, but excluding UK and North-America, which have their own product range and product overview brochures.
Bestand downloaden
1.7 MB

Onderhoud / Installatie
3 Bestanden

Onderhoud / Installatie


English
Parts Manuals - Replacement Ignition System and Gas Valves
Replacement ignition system and gas valves by serial number code and Maxitrol system components by serial number suffix
Bestand downloaden
1.3 MB
Conversion Info - Gas Conversion - Various Models
Gas conversion parts and instructions for various Reznor units
Bestand downloaden
1.5 MB
Field Service - Ignition Control Replacement - Various Models
Ignition control replacement kit for pilot code 62, 63, 65, 66, & 84 (found in first set of digitis of serial number)
Bestand downloaden
250.4 kB